Gann Harmonic Traders Manual
1. Installation
version 1.2 make real time data feeding!
Please goto Files Section to get it:
http://finance.groups.yahoo.com/group/gannHarmonicTraders/files/
Download it and unzipped it into any
directory! Here is the step to setup this program
Setup MT4(metatrader 4.0 and Experts Advisor first)
1. Download MT4
MT4 Client Terminal
http://www.metaquotes.net/downloads/
2. Find a MT4 Server.
You can google "MT4 data server", here is
what I use
EuroOrient-Demo - EuroOrient
Securities&Financial Services Ltd
Henyep-Demo - Henyep
Investment (UK) Ltd
Orion-DEMO - Orion Global Financial Services
STS-Demo - STS Finance SC
you can goto Files/Metatrader
4.0, use config.zip to replace your old config
directory. after it, you just need to open a free
account.
3. Setup Currency Loader
Put file "Currency_Loader.mq4" into this directory:
C:\Program Files\MetaTrader 4\experts
then run MT4,click menu View=>Navigator=>Expert Advisor, you would see
the name
"Currency_Loader",drag it to the chart
window and click OK.
You will see a "Currency_Loader" Text at
the right-top of the chart window.
You can also edit this experts advisor by changing its parameters like
BarsMin,MaxBarsInFile,FrequencyUpdate,or
load other timeframe charts.
The file will be created under this directory:
C:\Program Files\MetaTrader
4\experts\files\Export_History
4.Choose Data Feed File from Gann Harmonic Traders.
When gann Harmonic Traders bring up, press F6 to set
real time data feed filename.
Then, once this setup, you can press F8 to get this file, or you press F7 to
start real time data feeding. it refresh the screen
every 60 seconds.
TWO. Gann.INI configuration file
setup.
Open gann.ini using notepad.exe:
[current setting]
dataserverTimeZone=2
dataServerDaylightTimeSetting=0 //comments:
because data server could be in any place, this is data server timezone. The program convert data
to local time using this info.
exchangeTimeZone=-5;
exchangeDaylightTimeSetting=1 //3 timezone: date server timezone,
exchange timezone(the market u trade) and local timezone, local timezone get from
computer automatically.
exchange location=NYC
//the place u defined under following [location] section
Natal=GLD
//natal chart you defined under following [Natal Chart] section
harmonic1=8
harmonic2=6
chartdensity=240
orbTr=2.01
orbNatal=1.98
datafeedfile=C:\Program Files\MetaTrader
4\experts\files\Export_History\GOLD\GOLD_M5.csv //the file you set using F6 hot
key
[Gann MOF]
; SUN, MOON,Mercury, Venus, Mars, Jupiter, Saturn, Uranus,
; 1 is selected and 0 is ignored, any
combination fro 1 to 13 planets!
MOF Array=0,0,0,0,1,1,1,1,1,0,0,0,0,0 //this setup will compute average
of Mars to Neptune
[location]
;Longitude(E+W-,degree.minutes),Latitude(
NYC=-73.57,40.45
[Natal Chart]
;time is 24 hour format, 21:00 mean 9:00pm
:Format yy-mm-dd,hour:min,timezone,location
GLD=2004-11-18,9:30,-5,NYC
2. HotKey definition
F1: set wheel jump step is one minute(you can shift the chart by using Up Arrow or Down Arrow key on the right-bottom of your keyboard!).
F2: 30 minutes
F3: Daily
F4: Monthly.
F5: Open any Data file which is in metatrader 4.0 format(you can use Metatrader to save a .csv file then load it)
F6; Set real time data filename
F7: Go real time data feeding
F8: get data from your pre-defined data feed file.
F9: Chart for current time(in wheel mode)
3. Wheel
Program open to chart mode,
but you can switch to Wheel mode by using TAB key.
After you bring up the
window, the right side show transitting aspects. The
top side show Sun/Moon/Venus/Mars/Jupiter aspects to midpoints(include
Sun/Mars, Sun/Jupiter, etc¡..), the last one(Venus/Mars) means Venus/Mars
midpoint aspect to other midpoints.
All of these planets, aspects
and midpoints can be modified according to any personal taste.
The software can compute any
harmonic, from 2th harmonic to 30th
harmonic. Right click Mouse you will get this dialog.
This software can show 2
harmonic at same time, you can specify harmonic1
and harmonic2. default
is 8th and 6th harmonic.
If any aspect
belong to harmonic1, the text will show red, harmonic2 would show green,
if this aspect both fit harmonic1 and harmonic2, then show blue.
Orb-Transit is the Orb for these aspects.
You also can change the time
for the wheel, just input proper number under Year,Month,Day,Hour
and Min,the
time zone is GMT+2 right now(can change later).
You can shift the chart by
using Up Arrow or Down
Arrow key on the right-bottom of your keyboard!
Press F1, the shift rate is one hour, F2
is one day, F3 is one month. Or you can just
input your date and time in the dialog shown above.
2.Charting
Press Files=>Open menu and you can load any data file, the format is MetaTrader 4.0 compatible. There is a lot of market data
you can download from MetaTrader 4.0
After you load the data,
Press TAB key then you switch
to charting.
When you move the Mouse, the
aspect and midpoint will display for the point where your mouse is currently
at.
Same thing, you can move the
chart by using UP Arrow and Down Arrow key. You also can move the Chart by Drag
your Mouse!
Sometimes it might be too
slow for you, then just right click mouse and bring the dialog.
Under Chart Start Point, you can put 5000 or 10000 so you will see the
data which is from 5000 or 10000.
Use ChartDensity to specify how much points you
like to see in one screen.
When you specify different
harmonic, then only that harmonic aspect will show in red/green or blue!
The Trial version have some
limitation, you can use before 2009 June 24 or load up no more than 60 times!(This was removed!!!!)
If you want any personal
setup, you can email me.
