Gann Harmonic Traders Easy Start
where to download gannHarmonicTraders:
http://finance.groups.yahoo.com/group/gannHarmonicTraders/files/
There is a FREE and Basic version
http://groups.yahoo.com/group/gannHarmonicTraders/files/Release.zip
download “Release.zip” and unzip it into any local directory.
when I bring up the screen, I see nothing, how to load historical data file.
Press F5 and select your historical data file, but you have to choose correct data format before do this step(Right Click Mouse and set it in Setup Dialog). otherwise program could display funny charts.
where to choose my historical data file or data feed file type.
Right click Mouse and you will see a “Setup” dialog, there is a field called “Set ASCII/TEXT Data File Format”, choose right format(MT4, Yahoo,Vertextrader, LineChart…etc) for your file then click OK, if there is no one to fit you, email me and I will add one for u. Default is MT4 format.
For metastock file type, click “metastock” button and choose EMASTER file, then program will give you a stock list.
the red and green color only show 8th and 6th harmonic, I want to see 30 degree movement(i.e. 12th harmonic), or 15 degree movement(i.e. 24th harmonic), how to get it.
Just right click mouse, in “Setup” dialog. Change harmonic1(for 30 degree move u put 12, for 15 degree move u put 24) and harmonic2 then click OK. You can put two harmonic at same time.
The aspects like Mercury-Sun is not in the list, how to define my own aspect or midpoint lists.
You can define whole screen aspects/midpoint list in the file “Gann.INI”(Configuration Setting) file, here is the field:
[Aspect/Midpoint Defination]
; plant index: SUN=0, MOON=1,Mercury=2, Venus=3, Mars=4, Jupiter=5, Saturn=6,
; Uranus=7,
aspect1=0,0,3,5,5,5,6,6,6,7,7,7,8,8,8,9,9,9,5,5,5,5,6,6,6,1,1,1,1,1,1,1,1
aspect2=3,4,4,0,3,4,0,3,4,0,3,4,0,3,4,0,3,4,9,8,7,6,9,8,7,9,8,7,6,5,4,3,0
midpoint1=0,0,3,3,5,5,5,5,6,6,6,7,7
midpoint2=4,5,4,5,9,8,7,6,9,8,7,9,8
midpointx=0,1,3,4,5,12,13
the following screen will show where is these names from:
I want real time data feeding. How to do it:
Real time data feeding only in metatrader 4.0, please see here:
http://gannharmonictraders.t35.com/manual.htm
How to load latest data feed file
Press F8 to get latest. You have to set data feed file using F6 before this, for open a offline data file, you don’t need to use F6/F7/F8.
How to see ALL harmonics(1-36) aspects for any price chart point.
When your mouse move to a point, press TAB key. You will see wheel for this point, include aspects, midpoints and transit to natal!
When I am seeing PriceChart, not wheel. How can I move chart forward or backward.
You can use Up Arrow or Down Arrow key to move it, or just simply drag and pull.
When I am in Wheel mode, how can I input a data/time, or move the calendar.
You can set date/time in “Setup” dialog by
right click mouse. And use Up Arrow or Down Arrow key
to move the calendar, the step for this move
is defined by key F1(1 minute),F2(30 minute),F3(1
day),F4(1 month).
how to use “Moon move”
In the Price Chart, you
DOUBLE click mouse so define a moon start point, when you go to other point, it
will show distance, maximum is 180 degree, beyond 180, it will minus 180.
If you go to Wheel mode
by TAB key, you can also move wheel and see how Moon move.
How to choose a new Exchange Location(for ASC
and MC calculation)
Define this in Gann.INI file.
[current setting]
exchange location=NYC
you have to define NYC first under [location] field.
my data feed server timezone is not my Exchange timezone, how to do it?
In Gann.ini, you can set your dataserverTimeZone:
[current setting]
dataserverTimeZone=2
dataServerDaylightTimeSetting=0
Gann.INI
configuration file setup.
Open gann.ini using notepad.exe:
[current setting]
dataserverTimeZone=2
dataServerDaylightTimeSetting=0 //comments: because data server could be in any place, this is data server timezone. The program convert data to local time using this info.
exchange location=NYC //the place u defined under following [location] section
Natal=GLD //natal chart you defined under following [Natal Chart] section
[Gann MOF]
; this is removed.
[location]
;Longitude(E+W-,degree.minutes),Latitude(
NYC=-73.57,40.45
[Natal Chart]
;time is 24 hour format, 21:00 mean 9:00pm
:Format yy-mm-dd,hour:min,timezone,location
GLD=2004-11-18,9:30,-5,NYC
1. HotKey definition
F1: set wheel jump step is one minute(you can shift the chart by using Up Arrow or Down Arrow key on the right-bottom of your keyboard!).
F2: 30 minutes
F3: Daily
F4: Monthly.
F5: Open any Data file which is in metatrader 4.0 format(you can use Metatrader to save a .csv file then load it)
F6; Set real time data filename
F7: Go real time data feeding
F8: get data from your pre-defined data feed file.
F9: Chart for current time(in wheel mode)
3. Wheel
Program open to chart mode, but you can switch to Wheel mode by using TAB key.
After you bring up the window, the right side show transitting aspects. The top side show Sun/Moon/Venus/Mars/Jupiter aspects to midpoints(include Sun/Mars, Sun/Jupiter, etc…..), around the middle, it show transit to natal aspects!
All of these planets, aspects and midpoints can be modified according to any personal taste.
The software can compute any harmonic, from 2th harmonic to 36th harmonic. Right click Mouse you will get this dialog.
This software can show 2 harmonic at same time, you can specify harmonic1 and harmonic2. default is 8th and 6th harmonic.
If any aspect belong to harmonic1, the text will show red, harmonic2 would show green, if this aspect both fit harmonic1 and harmonic2, then show blue.
ORB is the Orb for these aspects.
You also can change the time for the wheel, just input proper number under Year,Month,Day,Hour and Min, the Natal Date u can also change it or you can mondify at Gann.INI file.
This is wheel screen!
You can shift the chart by using Up Arrow or Down Arrow key on the right-bottom of your keyboard!
Press F1, the shift rate is one hour, F2 is one day, F3 is one month. Or you can just input your date and time in the dialog shown above.
2.Charting
Press Files=>Open menu and you can load any data file, the format is MetaTrader 4.0 compatible. There is a lot of market data you can download from MetaTrader 4.0
After you load the data, Press TAB key then you switch to charting.
When you move the Mouse, the aspect/midpoint/to natal will display for the point where your mouse is currently at.
Same thing, you can move the chart by using
UP Arrow and Down Arrow
key. You also can move the Chart by Drag your Mouse!
Sometimes it might be too slow for you, then just right click mouse and bring the dialog.
Under Chart Start Point, you can put 5000 or 10000 so you will see the data which is from 5000th or 10000th Bar.
Use ChartDensity to specify how much points you like to see in one screen.
When you specify different harmonic, then only that harmonic aspect will show in red/green or blue!
The Trial version have some limitation, (This was removed for FREE and Basic Version!!!!)
If you want any personal setup, you can email me at.
